B.E. Civil Engineering Entrance Coaching
Entrance preparation for diploma holders targeting the B.E. Civil Engineering (Evening) programmes at JMI and AMU, built on diploma-level civil engineering, engineering mathematics and numerical practice.
About B.E. Civil Engineering
B.E. Civil Engineering is an undergraduate engineering degree concerned with the planning, analysis, design, construction and maintenance of infrastructure such as buildings, highways, bridges, tunnels, railways, airports, dams and water-supply systems.
At JMI the Department of Civil Engineering lists B.E. Civil Engineering (Evening) separately from B.Tech Civil Engineering and B.Tech Civil Engineering (Construction Technology, self-financed). The B.E. Evening programme is intended mainly for candidates entering through the diploma route, so its eligibility and admission process differ from regular B.Tech.
Students applying after Class XII should check the B.Tech admission route instead. For 2027–28, prepare on the latest available pattern and verify the details in the new JMI prospectus when it is released.
Who can apply
The B.E. Evening programme at JMI is designed mainly for candidates with a diploma in engineering, subject to the conditions JMI prescribes for each session. AMU lists Diploma Engineering as the entry requirement for its B.E. (Civil) Evening programme. Confirm the detailed conditions in the 2027–28 prospectus of each university.
B.E. Civil Engineering entrance syllabus
Diploma-level civil engineering subjects covered in our preparation. Match the exact syllabus and weightage with the official notification for the admission year.
Engineering mathematics
- Algebra and trigonometry
- Coordinate geometry
- Matrices and determinants
- Differential calculus
- Integral calculus
- Differential equations
- Probability and statistics
- Mensuration and engineering calculations
Engineering mechanics and applied sciences
- Force, moment and resultant forces
- Equilibrium and friction
- Centre of gravity and centroid
- Moment of inertia
- Simple machines
- Work, power and energy
- Applied physics
- Applied chemistry
- Engineering drawing
Strength of materials
- Stress, strain and elasticity
- Hooke's law and elastic constants
- Shear stress
- Shear force and bending moment
- Bending and torsion
- Beams and deflection
- Columns and struts
- Principal stress
Surveying
- Principles of surveying
- Chain and compass surveying
- Plane table surveying
- Levelling and contouring
- Theodolite surveying and traversing
- Tacheometry
- Curves
- Total station and modern instruments
- Basic GPS/GNSS concepts
Building materials and construction
- Stones, bricks, cement and lime
- Timber, steel and glass
- Mortar, paints and bitumen
- Modern construction materials
- Foundations, walls and masonry
- Floors, roofs and stairs
- Doors and windows
- Damp proofing and plastering
- Scaffolding and formwork
Concrete technology
- Cement, aggregates and water
- Water-cement ratio
- Concrete mix design
- Workability and slump test
- Compaction and curing
- Strength and testing of concrete
- Admixtures
- Reinforced cement concrete basics
Soil mechanics and foundation engineering
- Soil formation and classification
- Index properties and water content
- Specific gravity and permeability
- Compaction and consolidation
- Shear strength
- Bearing capacity and earth pressure
- Shallow and deep foundations
- Isolated, combined and raft footings
- Pile foundations and settlement
Fluid mechanics, hydraulics and water resources
- Properties of fluids and hydrostatics
- Continuity equation
- Bernoulli's theorem
- Flow through pipes
- Open channel flow
- Pumps and turbines
- Discharge measurement
- Hydrological cycle, rainfall and runoff
- Irrigation: duty, delta and crop period
- Canals, dams, reservoirs and spillways
- Groundwater and water distribution
Environmental engineering
- Sources and demand of water
- Water quality and treatment
- Sedimentation, filtration and disinfection
- Distribution systems
- Sewerage and sewage treatment
- Solid waste management
- Air and water pollution
- Environmental protection
Transportation engineering
- Highway alignment and road materials
- Geometric design
- Flexible and rigid pavements
- Traffic engineering and signs
- Road construction and maintenance
- Railway engineering basics
- Airport engineering basics
Estimation, costing and construction management
- Types of estimates
- Quantity estimation and rate analysis
- Measurement of works
- Bill of quantities and specifications
- Valuation basics
- Construction planning and scheduling
- Bar charts, CPM and PERT
- Quality control and safety management
- Materials, labour and equipment management
AMU and CUET (UG)
AMU B.E. (Civil) Evening
AMU offers B.E. (Civil) Evening, separate from its regular B.Tech Civil Engineering, with Diploma Engineering as the entry requirement. Under the 2026–27 Guide to Admissions the course code was CVBEA, selection was through AMU's own two-hour admission test and not CUET. Verify the 2027–28 Guide to Admissions after publication.
CUET (UG) for B.Tech Civil
Some CUET-participating universities admit to B.Tech Civil Engineering or related programmes through CUET (UG), typically using combinations of Physics, Chemistry, Mathematics, a language and the General Aptitude Test. The combination varies by university, and CUET is not the route for the JMI or AMU B.E. Evening programmes.
How we prepare you
Preparation plan
- Months 1–2: engineering mathematics, mechanics, strength of materials, building materials and surveying
- Months 3–4: concrete technology, soil mechanics, hydraulics, environmental, transportation, irrigation, and estimation and costing
- Keep a separate formula and revision notebook
- Month 5: chapter-wise MCQs, previous-year questions and numerical problems
- Revise weak topics and formulae regularly
- Month 6: full-length JMI- and AMU-pattern mock tests with error analysis
Coaching fee for B.E. Civil Engineering
Meer Sir Academy coaching fee: Online ₹20,000 · Offline ₹30,000.
Career and higher-study options
B.E. Civil Engineering entrance: common questions
Does JMI offer B.E. Civil Engineering?
Yes. JMI lists B.E. Civil Engineering (Evening) under its Department of Civil Engineering, separately from B.Tech Civil Engineering.
Is B.E. Civil Engineering the same as B.Tech Civil Engineering at JMI?
No. They are separate programmes with different eligibility and admission routes. The B.E. Evening programme is intended mainly for diploma holders, while students applying after Class XII should check the B.Tech route.
Does AMU offer B.E. Civil Engineering?
Yes. AMU lists B.E. (Civil) Evening with Diploma Engineering as the entry requirement. For 2026–27 its course code was CVBEA.
Is the AMU B.E. Civil Engineering admission through CUET?
No. AMU's 2026–27 Guide to Admissions lists B.E. Civil Engineering (CVBEA) under its own admission test, with a duration of two hours.
Is the JMI B.E. Civil Engineering admission through CUET?
Candidates should not treat CUET as the JMI B.E. route. JMI publishes its own programme-specific admission process in the prospectus.
What should I study for the B.E. Civil Engineering entrance?
Diploma-level civil engineering subjects, engineering mathematics and numerical problem-solving, with objective practice. Always match your preparation with the syllabus the target university prescribes.
Start your B.E. Civil Engineering preparation
Online, offline, weekend and crash-course batches for 2027–28. Al-Zahra Scholarship Test on 16 November – ₹2,00,000 in scholarships.
